Central Missouri Countertops


Care & Maintenance: Laminate & Trespa

Cleaning Tips

To clean the surface, use a damp cloth or sponge and a mild soap or detergent. Difficult stains such as coffee or tea can be removed using a mild household cleaner and baking soda; mixing to achieve a paste consistency. Use a stiff nylon bristle brush, scrubbing (approx. 15-20 strokes) the affected area. Do not scrub so as to mar (damage, scratch) the surface finish.

Stubborn stains that resist any of the above cleaning methods may require the use of undiluted household bleach or nail polish remover. Use a cotton ball saturated with bleach or nail polish remover (acetone), gently rub the stain for up to two minutes. Rinse thoroughly with warm water and wipe dry using a soft cloth. This step may be repeated if the stain appears to be going away and the color of the laminate has not been affected.

WARNING: Prolonged exposure of the laminate surface to bleach will cause discoloration. Always rinse laminate surfaces after cleaning! Failure to rinse after cleaning can cause damage; even if a small amount of cleaning solution remains on the surface. A dry residue may be invisible; however, moisture from cups or drinks can reactivate it, and result in permanently etched scars or stains over time.

Recommended Household Cleaners:
  • Clorox®*
  • Formula 409®
  • Dawn®
  • Glass Plus®
  • Dow Bathroom Cleaner with Scrubbing Bubbles
  • Fantastik®
  • Favor®
  • Windex®
  • Lestoil®
  • Pledge®
  • Grease Relief®
  • Lysol® Brand Disinfectant Basin / Tub / Tile Cleaner
  • Mr. Clean®
  • TOP JOB®

* Prolonged exposure can mar the surface

A Few Notes of Caution

Acidic or abrasive cleaners can damage laminate surfaces; do not use them. Drain cleaners containing lye will permanently damage the laminate surface. If you spill a drain cleaner, wipe it up immediately and rinse several times with water.

Hair, textile and food dyes can cause permanent stains. If dye should happen to spill, wipe it up immediately with dishwashing detergent or an all-purpose cleaner.

Wipe spills away promptly and rinse several times with water.

Rust removers contain harsh chemicals, which will quickly cause permanent damage. If a spill occurs, wipe off all residue immediately, wash thoroughly with soapy water and rinse several times.

Steel wool and other abrasive pads will damage the laminate face. Do not use them for cleaning and don’t store steel wool pads on your countertop; the metal can rust and leave stains.

Toilet bowl cleaners contain harsh chemicals that can cause permanent damage. If spills occur, wipe up immediately, wash surface with soapy water and rinse several times.

The cleaners listed below can cause damage to the surface of laminate:
Chemical Ingredient Synonymous Names
Hydrochloric Acid Muriatic Acid
Hydrogen Chloride
Sulfuric Acid Oleic Acid
Oil of Vitriol
Oleum
Hydrofluoric Acid Rust Remover
Phosphoric Acid Rust Remover
Sodium Hydroxide Caustic Soda
Caustic
Lye
Soda Lye
Pumice (abrasive)  


Remember, sharp objects can damage the surface of Wilsonart Laminate, marring its beauty and lowering wear and stain resistance. Although high pressure laminates are somewhat resistant to scratch and marring, the surface can be damaged, even under normal use.

Wilsonart Laminate may need occasional dusting depending on where it’s used. To keep the surface beautiful, use a non-oily furniture spray. (Remember to clean the spray off several times a year to prevent build-up.) Furniture polish can also help hide fine scratches in the surface.

Home | Products | Process | About | FAQ | Commercial | Photo Gallery | Links | Contact | ©2014 Central Missouri Countertops
Designed by MayeCreate Design | Hosted by Tnet